WOT 15 Rebuild Kit – Complete Upgrade Kit
Restore and enhance your trigger assembly with the WOT 15 Rebuild Kit from Militia State Armory, featuring hardened O1 tool steel components for reliable, precision performance.
Upgrade Your WOT Trigger Assembly with the WOT 15 Rebuild Kit
The WOT 15 Rebuild Kit – Complete Upgrade Kit is the ultimate solution for restoring and upgrading your Wide Open Trigger assembly. Engineered by Militia State Armory, this comprehensive kit includes every component needed to bring your trigger back to factory specs or better. By combining precision-machined parts with hardened O1 tool steel, the WOT 15 Rebuild Kit delivers unmatched durability, reliability, and performance for both professional gunsmiths and DIY enthusiasts.
What Is the WOT 15 Rebuild Kit?
The WOT 15 Rebuild Kit is a full set of replacement and upgrade parts designed specifically for WOT trigger systems. Rather than purchasing an entirely new trigger assembly, this kit allows you to rebuild and enhance your existing WOT trigger with high-quality components. Whether your trigger has worn over time or you want to fine-tune the feel and function, the WOT 15 Rebuild Kit makes it easy to achieve consistent, crisp breaks and reliable reset.
Key Components and Design Improvements
This Complete Upgrade Kit includes the following precision parts:
- Flat Faced Trigger or Classic Faced Trigger, machined to tight tolerances for a consistent pull
- Trigger Hammer made from hardened O1 tool steel tempered to 58 RCH for maximum strength
- V2 Locking Bar with redesigned back edge and slightly increased height for improved lock-up
- Locking Bar Spring and additional torsion spring for reliable disconnect and reset
- Trigger Return Spring and Hammer Spring pre-formed with custom bending fixtures for optimal spring tension
The use of hardened O1 tool steel across internal components significantly reduces wear and ensures that mating surfaces remain square and true. By re-imagining the locking bar geometry, the WOT 15 Rebuild Kit achieves a rock-solid bolt carrier lock-up at exactly 90 degrees, minimizing play and extending service life.
Enhanced Performance and Reliability
One of the most notable upgrades in the WOT 15 Rebuild Kit is the reduced disconnect depth on the locking bar. The smaller, more precise disconnect engages consistently with the bolt carrier, virtually eliminating the risk of taking an incomplete reset. This change allows shooters to enjoy a smoother, faster, and cleaner trigger reset with less finger movement and reduced risk of double-feeds or misfires caused by over-squeezing.
Because the new locking bar must be paired with a hardened steel trigger, we include the matching Flat or Classic Faced Trigger to ensure compatibility. Using the stock trigger with the new locking bar can cause accelerated wear on the disconnect shelf. With the correct combination of hardened tool steel parts, your trigger assembly will withstand thousands of rounds without degradation.
Step-By-Step Installation Guide
Rebuilding your WOT trigger with this kit is straightforward when you follow a methodical approach. Below is a concise installation outline:
- Preparation: Clear a clean workspace and gather basic tools such as punches, a small hammer, and a watchmaker’s screwdriver set. Review your equipment manual and the included kit instructions.
- Disassembly: Unload your firearm and remove the trigger assembly. Carefully disassemble the trigger group, noting the orientation and order of each part. Clean each component to remove carbon, debris, and old lubricant.
- Inspection: Examine existing parts for cracks, deformation, or excessive wear. Replace any damaged parts with the new components from the rebuild kit.
- Assembly: Install the new hammer, trigger, locking bar, and springs in the correct order. Ensure all pins are fully seated and springs are properly tensioned. Use the provided trigger return spring and hammer spring to achieve the recommended pull weight.
- Function Check: Before live-fire testing, perform a dry-fire check to confirm smooth engagement, crisp break, and reliable reset. Inspect the lock-up and disconnect engagement visually.
- Live-Fire Testing: Conduct range testing to validate field performance. Verify consistent trigger pull weight, clean reset, and no malfunction during semi-automatic fire.
Maintenance and Care
To maintain peak performance, apply a light coating of high-quality trigger assembly lubricant to friction surfaces. Periodically inspect springs for loss of tension and replace as needed. Follow your firearm manufacturer’s recommended maintenance schedule and use the Militia State Armory VIP warranty program for any replacement parts or service inquiries.
Customer Warranty and Support
Militia State Armory stands behind every WOT 15 Rebuild Kit with a VIP customer warranty. If you encounter any issues, simply contact our support team for a warranty replacement or a full refund. Our mission is to deliver upgrade parts you can stake your life on, backed by responsive service and expert advice.
Upgrade your WOT trigger assembly today with the WOT 15 Rebuild Kit – Complete Upgrade Kit and experience the confidence of precision-engineered, hardened tool steel components designed for continuous rugged use.
| Brand | Militia State Armory |
| SKU | frt-15-6 |
| UPC | |
| Caliber | |
| Included Components | 1x Hammer, 1x Flat Faced Trigger or Classic Faced Trigger, 1x V2 Locking Bar, 1x Locking Bar Spring, 1x Trigger Return Spring, 1x Hammer Spring |
| Materials | Hardened O1 Tool Steel, Spring Steel |
| Compatibility | Wide Open Trigger Assemblies |
| Warranty | VIP Customer Warranty |
| Brand |
Militia State Armory |
|---|
